PC Countersunk Cross Recess Screws are polycarbonate fasteners featuring a countersunk head and cross-shaped recessed drive. The supplied product photo shows a clear transparent appearance and a visibly fully threaded body. Flybear supplies this product through a B2B RFQ process rather than fixed online retail specifications. Production requirements are reviewed against customer drawings, physical samples, BOMs, product lists or other confirmed technical documentation. Exact PC material grade, thread geometry, dimensions, tolerances, countersunk details, applicable standards, inspection criteria and packaging requirements remain project-specific and are confirmed before quotation and production.
PC Countersunk Cross Recess Screws Overview
The PC Countersunk Cross Recess Screws shown in the supplied photo use polycarbonate material with a countersunk head and recessed cross-shaped drive. Both samples have a clear to transparent appearance, and the threaded section extends visibly along the screw body. The countersunk head is designed as a recessed seating geometry, while the exact mating countersink dimensions must be matched to the customer assembly. Nominal thread diameter, pitch, thread profile, screw length, head diameter, countersunk angle and drive recess dimensions cannot be established from the image and should therefore be defined by drawing or confirmed sample.
Key Features
- Polycarbonate material is confirmed for this product; the exact PC resin grade or formulation is confirmed during RFQ.
- Countersunk head geometry is clearly visible on the supplied samples.
- Cross-shaped recessed drive is visible without assuming a specific Phillips, Pozidriv or other standardized recess designation.
- PC Countersunk Cross Recess Screws can be reviewed against customer drawings for project-specific dimensions, threads and tolerances.
- Fully threaded appearance is visible in the supplied photo; exact thread form and pitch are according to drawing.
- Clear transparent appearance is shown on the samples, with final color and appearance requirements confirmed during RFQ.
- Head dimensions, recess geometry and countersunk details can be controlled according to approved technical documentation.
- Suitable for B2B sourcing from drawings, samples, BOMs and project-specific product lists.
Specification Options
| Product Type | Polycarbonate countersunk cross recess screw |
| Material | Polycarbonate (PC) |
| Material Grade | Confirmed during RFQ |
| Head Style | Countersunk head |
| Drive Type | Cross recess |
| Thread | Fully threaded appearance; exact thread specification according to drawing |
| Dimensions | According to drawing |
| Surface Finish | Smooth clear surface appearance as shown; final requirement confirmed during RFQ |
| Color | Clear / transparent as shown |
| Standard | Confirmed during RFQ |
| Tolerances | According to drawing |
| Inspection | According to drawing or agreed inspection requirements |
| Packaging | Confirmed during RFQ |
Typical Applications
This configuration may be considered for industrial assemblies where the technical documentation specifies a polycarbonate screw with countersunk seating and a recessed cross drive. Typical project areas may include:
- Clear or plastic equipment housings with corresponding countersunk mounting locations
- Electrical and electronic assemblies designed for polymer fasteners
- Instrument covers, panels and enclosure components
- Plastic component assemblies using drawing-defined threaded connections
- Custom industrial products manufactured according to customer drawings or BOM requirements
Final suitability must be verified against the actual assembly design, mechanical load, operating environment, mating materials, thread engagement and installation conditions. Any project-specific performance requirement should be identified in the RFQ for technical review rather than assumed from the material name alone.
Manufacturing and Quality Support
Customer specifications can be evaluated through our manufacturing capabilities, including drawing-based review of countersunk geometry, drive recess dimensions, thread requirements and other production details. Inspection expectations can be discussed with reference to our quality process, while related industrial fastener families are available through the Products page. Additional company and manufacturing information is available from Flybear Industrial.
For PC Countersunk Cross Recess Screws, technical review can cover the required PC designation, thread specification, screw dimensions, countersunk head geometry, recess requirements, dimensional tolerances, transparent appearance criteria and agreed inspection points. Special dimensional, material, inspection or packaging requirements should be included before quotation so manufacturing feasibility can be evaluated against the submitted documentation.
What to Include in Your RFQ
- Dimensioned technical drawing with relevant tolerances
- Physical samples or clear sample photos when available
- Required PC material grade or formulation
- Thread type, nominal diameter, pitch and engagement requirements
- Head diameter, countersunk angle, recess dimensions and overall screw length
- Required surface appearance, finish and color
- Order quantity or estimated annual demand
- Inspection criteria, reports or documentation requirements
- Packaging and labeling requirements
- Delivery destination and other project-specific information
Frequently Asked Questions
Can these PC screws be customized?
Yes. Thread dimensions, screw length, countersunk head geometry, drive recess dimensions, appearance and other project-specific requirements can be evaluated according to customer drawings or physical samples. Final manufacturing feasibility is subject to technical review.
What information should I provide for quotation?
A dimensioned drawing is preferred. Physical samples, BOMs, product lists or clear photos can also support initial review. Please include the required material grade, thread details, dimensions, quantity, inspection expectations and delivery destination when available.
Why is there no fixed online price?
Industrial fastener pricing depends on the confirmed material specification, dimensions, processing requirements, tolerances, quantity, inspection level and packaging. A project-specific quotation is prepared after the technical requirements have been reviewed.
Can the transparent appearance and countersunk head geometry be specified?
Yes. The required PC grade, clarity or color requirement, head diameter, countersunk angle and cross recess dimensions can be defined by drawing or purchasing specification. Exact requirements are confirmed during RFQ and remain subject to technical review.
Send your drawing, sample photos or product list through our contact page for technical review and quotation.
