The PA66 Cross Recess Pan Head Screws are polyamide fasteners specified with a pan head and a cross-shaped recessed drive. Flybear supplies this product through a B2B RFQ process rather than fixed online retail specifications. Final production requirements are reviewed against customer drawings, physical samples, BOMs, product lists or other confirmed technical documentation. Exact PA66 compound grade, thread geometry, dimensions, dimensional tolerances, color, surface requirements, applicable standards, inspection criteria and packaging are confirmed according to the individual project.
PA66 Cross Recess Pan Head Screws Overview
The product uses PA66 material with a pan head and cross recess drive configuration. The PA66 Cross Recess Pan Head Screws can be evaluated for assemblies where the engineering design calls for a polymer screw with a raised pan-style head and recessed cross drive. Exact nominal thread diameter, thread form, pitch, screw length, head diameter, head height and recess dimensions are according to drawing. The specific PA66 resin compound, color and molded surface appearance should also be identified in the RFQ when these details are controlled by the application.
Key Features
- PA66 material confirmed for the requested screw configuration; the exact resin compound grade is confirmed during RFQ.
- Pan head geometry as specified in the product description.
- Cross recess drive configuration without assuming a specific Phillips or other standardized recess designation.
- PA66 Cross Recess Pan Head Screws can be reviewed against customer drawings for project-specific dimensions and tolerances.
- Thread type, nominal diameter, pitch and engagement requirements are produced according to the approved drawing or confirmed sample.
- Head diameter, head height and recess dimensions can be specified through customer technical documentation.
- Color and molded surface requirements are confirmed during RFQ rather than assumed from a generic specification.
- Suitable for B2B sourcing from drawings, samples, BOMs and project-specific product lists.
Specification Options
| Product Type | PA66 cross recess pan head screw |
| Material | Polyamide 66 (PA66) |
| Material Grade | PA66; specific resin compound grade confirmed during RFQ |
| Head Style | Pan head |
| Drive Type | Cross recess |
| Thread | According to drawing |
| Dimensions | According to drawing |
| Surface Finish | Confirmed during RFQ |
| Color | Confirmed during RFQ |
| Standard | Confirmed during RFQ |
| Tolerances | According to drawing |
| Inspection | According to drawing or agreed inspection requirements |
| Packaging | Confirmed during RFQ |
Typical Applications
This screw configuration may be considered for industrial assemblies where the design specifically requires a PA66 fastener with a pan head and recessed cross drive. Typical project areas may include:
- Electrical or electronic housings designed for polymer fasteners
- Instrument covers, panels and equipment assemblies
- Plastic components with drawing-defined threaded connections
- Mechanical or electromechanical products specifying non-metallic screws
- Custom industrial assemblies manufactured from customer drawings or BOM requirements
Final suitability should be verified against the actual assembly design, mechanical load, operating environment, mating material, required thread engagement and installation conditions.
Manufacturing and Quality Support
Customer requirements can be evaluated through our manufacturing capabilities, including drawing-based review of head geometry, recess dimensions, thread requirements and other production details. Inspection expectations can be discussed with reference to our quality process, while related industrial fastener families are available through the Products page. Additional company and manufacturing information is available from Flybear Industrial.
For PA66 Cross Recess Pan Head Screws, technical review can cover material designation, thread specifications, screw dimensions, pan head geometry, recess requirements, tolerances, appearance criteria and agreed inspection points. Any special material, dimensional or packaging requirements should be included in the RFQ so feasibility can be evaluated before quotation.
What to Include in Your RFQ
- Dimensioned technical drawing with relevant tolerances
- Physical samples or clear sample photos when available
- Required PA66 grade or compound specification
- Thread type, nominal diameter, pitch and engagement requirements
- Head, recess and overall screw dimensions
- Required surface appearance, finish and color
- Order quantity or estimated annual demand
- Inspection criteria, reports or documentation requirements
- Packaging and labeling requirements
- Delivery destination and other project-specific information
Frequently Asked Questions
Can these screws be customized?
Yes. Thread dimensions, overall length, pan head geometry, cross recess dimensions, color and other project-specific requirements can be evaluated according to customer drawings or samples. Final manufacturing feasibility is subject to technical review.
What information should I provide for quotation?
A dimensioned drawing is preferred. Physical samples, BOMs, product lists or clear photos can also support an initial review. Please include the material requirement, thread details, dimensions, quantity, inspection expectations and delivery destination when available.
Why is there no fixed online price?
Industrial fastener pricing depends on the confirmed material specification, dimensions, tooling requirements, tolerances, quantity, inspection level and packaging. A project-specific quotation is therefore prepared after the technical requirements have been reviewed.
Can the PA66 grade and pan head dimensions be specified?
Yes. The required PA66 compound, head diameter, head height and cross recess dimensions can be defined by drawing or sample. Exact material grade, dimensional requirements and manufacturing feasibility are confirmed during RFQ.
Send your drawing, sample photos or product list through our contact page for technical review and quotation.
